Sticking deadbolts, misaligned latches, broken keys, worn cylinders — repaired properly in Keller instead of replaced automatically.
(855) 295-4003New homes in Keller generate more lock repair calls than people expect. Fresh framing settles during the first couple of years, doors shift, and a deadbolt that threw smoothly at closing starts dragging against the strike. That's an alignment problem, not a lock problem, and replacing the hardware wouldn't fix it. We adjust the strike and the door, and you keep the lock you have.
Keller's Saratoga and Marshall Ridge builds cycle through builder master keys before owners ever move in. We cover all of it under Texas DPS license #B28617101, across Tarrant County, from 10AM to midnight — seven days a week, holidays included.
Set screws, spindles, and internal mechanisms rebuilt rather than replaced when the hardware is otherwise sound.
When a key only works if you jiggle it, either the key or the cylinder has worn. We identify which and fix that one.
Keypads that won't respond, motors that stall, and deadbolts that struggle because the door needs adjustment rather than new batteries.
Cylinder cleaning, correct lubrication, and re-pinning where wear has gone too far. Most sticking locks are recoverable.
Strike plate adjustment, mortising, and hinge work where the door has dropped. This is the single most common repair we do.
Describe what the lock does — sticks, drags, won't turn, works from inside only. Half the diagnosis happens on the phone.
The tech checks cylinder, latch, strike, frame and door alignment as a system, because they fail as a system.
We'd rather adjust a strike plate than sell you a deadbolt you don't need. If replacement genuinely is the answer, we say so and quote it.
Full cycle test, key operation checked both sides, and honest notes on anything else on the door that's heading toward failure.
You have to push or lift the door to lock it. Alignment problem, quick fix, and ignoring it eventually kills the bolt.
Gets worse over months until one day it doesn't turn at all. Usually cylinder wear, key wear, or debris — all serviceable.
Extremely common in Keller new construction. Framing moves, the strike no longer lines up, and the deadbolt starts fighting you.
Grade 3 hardware in a subdivision full of identical doors tends to fail on a similar timeline. We repair where it makes sense and tell you when it doesn't.
We extract the fragment and assess the cylinder. Often the lock is fine once the piece is out.
A deadbolt that throws fine with the door open but binds when it's closed is almost always a strike alignment issue caused by the door settling or the frame shifting. Replacing the lock does nothing. Adjusting the strike takes minutes.
A key that has to be wiggled, lifted, or held at an angle usually means the key is worn, not the lock. Keys copied from copies drift further from the original cut each generation. Cutting a fresh key from the original code, where one exists, solves a surprising number of these calls.
Dispatched from Grand Prairie, typically reaching Keller in 20–40 minutes depending on traffic.
Our home lock repair coverage in Keller spans ZIP 76244, 76248, 76262 and everything between Old Town Keller and Marshall Ridge. Expect a 20–40 minute arrival window in normal traffic, with pinning kits, springs, strike plates, latch parts and closer components on board to close out the job in one visit.
Keller new-builds in Saratoga and Marshall Ridge get fresh rekeys from us regularly — builder master keys end up in too many hands during construction.
Tell us what you need. We'll text or call back fast — usually within 15 minutes during open hours.
Based in Grand Prairie, with mobile units staged across the region. Tap the map to open directions in Google Maps.
