Grade 1 hardware, exit devices, and storeroom function locks installed for Keller businesses — with code compliance handled.
(855) 295-4003Most Keller small businesses inherit whatever hardware the last tenant left. It's usually residential-grade on a commercial door, keyed to a system nobody has a record of. Changing it gives you hardware rated for the traffic and, more importantly, a key plan that you actually control.
Keller's Saratoga and Marshall Ridge builds cycle through builder master keys before owners ever move in. We cover all of it under Texas DPS license #B28617101, across Tarrant County, from 10AM to midnight — seven days a week, holidays included.
A documented hierarchy — who opens what — designed before hardware is ordered rather than improvised afterward.
Full mortise body replacement or retrofit on older Keller commercial doors, matched to the existing door prep where possible.
ANSI/BHMA Grade 1 lever sets, deadbolts and cylindrical locks rated for commercial cycle counts rather than residential use.
SFIC and LFIC hardware so future rekeys take seconds per door instead of a full service visit.
Closers adjusted or replaced, strikes reinforced, and frames addressed. Commercial doors fail at the frame as often as the lock.
We survey every opening in your Keller location, note door material, frame type, existing prep and current function. Guessing this on a commercial job is expensive.
Before hardware is ordered, we map who needs access to what. Master, sub-master, and individual keys planned on paper first.
Work scheduled around your operating hours. Most commercial changes happen early, late, or on a closed day.
Every cylinder, key and code recorded and handed to you in writing, so key control survives staff turnover.
Moving from a drawer full of unlabeled keys to a documented system.
Damaged hardware replaced and the opening reinforced so the same method doesn't work twice.
A door flagged for egress or hardware compliance. We fix the specific finding and verify the rest of the building while we're there.
You took over the space and the previous tenant's keys are unaccounted for. Change or rekey before you open.
Extremely common in Keller small business spaces, and it fails within a year or two.
The most common mistake we see is treating commercial doors like residential ones. A shop or office door might cycle two hundred times a day. Residential Grade 3 hardware is rated for a fraction of that, so it wears out in months, and then it gets replaced with the same thing again.
The second mistake is buying hardware before planning access. Once locks are installed and keys are cut, changing the hierarchy means redoing the work. Deciding first who opens what — managers, shift leads, cleaners, contractors — and then specifying hardware to match is faster, cheaper, and produces a system that still makes sense two years later.
Dispatched from Grand Prairie, typically reaching Keller in 20–40 minutes depending on traffic.
For commercial lock change in Keller, we run from Grand Prairie into Tarrant County on a 20–40 minute typical drive. Neighborhoods like Old Town Keller and Marshall Ridge are regular stops for us, and the trucks carry Grade 1 lever sets, mortise components, exit device parts and commercial strikes.
Keller new-builds in Saratoga and Marshall Ridge get fresh rekeys from us regularly — builder master keys end up in too many hands during construction.
Tell us what you need. We'll text or call back fast — usually within 15 minutes during open hours.
Based in Grand Prairie, with mobile units staged across the region. Tap the map to open directions in Google Maps.
