Exit devices, door closers, mortise locks and misaligned commercial doors repaired in Keller — before they become a compliance problem.
(855) 295-4003Small business owners in Keller usually call us after living with a door problem for months. Fair enough — it's rarely urgent until it is. The good news is most of these are alignment, closer and strike issues that we can correct in a single visit, without new hardware.
Keller's Saratoga and Marshall Ridge builds cycle through builder master keys before owners ever move in. We cover all of it under Texas DPS license #B28617101, across Tarrant County, from 10AM to midnight — seven days a week, holidays included.
The most common commercial door fault in Keller. The door has moved; the strike hasn't.
Closers that slam, don't close, or don't latch. Adjustment, seal replacement, or replacement when the body has failed.
Commercial mortise bodies stripped, cleaned, re-sprung and re-pinned rather than automatically replaced.
Worn cylinders on high-cycle doors serviced, or re-pinned where a key has been circulating too long.
Push bars that stick, latch, or fail to retract. Egress hardware is a safety item and gets priority over convenience items.
Tell us what the door does — won't latch, sticks, slams, doesn't relock. That narrows the cause faster than a brand name would.
The tech evaluates lock, latch, strike, closer, hinges and frame as one system, because commercial doors fail as one system.
Common closers, strikes, springs and cylinder parts are on the truck, so most Keller repairs finish in one visit.
Every repaired opening cycled and, on exit doors, egress verified. We note anything else heading toward failure.
High-cycle commercial cylinders wear. Often serviceable rather than replaceable.
Staff have to pull it shut. That means it's unlocked whenever nobody remembers, which is most of the time.
Repair keeps things running while you plan for eventual replacement.
Months of pulling, lifting or double-checking. Usually a one-visit fix.
Extracted and assessed, usually with the door back in service the same visit.
A Keller business door that doesn't latch reliably is unlocked more often than it's locked, because staff stop checking after the first few weeks. That's not a hardware failure any more — it's an open building. Most of the after-hours losses we get called about afterwards trace back to a door somebody had been meaning to fix.
There's a second cost that's easier to ignore. A misaligned door destroys its own hardware. Every cycle where the latch has to be forced past a bad strike wears both parts, and a closer fighting a dragging door burns itself out. The repair gets more expensive the longer it waits, and eventually turns into a replacement.
Dispatched from Grand Prairie, typically reaching Keller in 20–40 minutes depending on traffic.
We dispatch commercial lock repair calls to Keller out of Grand Prairie, usually reaching Tarrant County addresses in 20–40 minutes. Techs carry closer parts, exit device components, commercial strikes and cylinder service kits on the truck, so most Keller jobs finish on the first visit rather than turning into a return trip.
Keller new-builds in Saratoga and Marshall Ridge get fresh rekeys from us regularly — builder master keys end up in too many hands during construction.
Tell us what you need. We'll text or call back fast — usually within 15 minutes during open hours.
Based in Grand Prairie, with mobile units staged across the region. Tap the map to open directions in Google Maps.
