Sticking deadbolts, misaligned latches, broken keys, worn cylinders — repaired properly in Fort Worth instead of replaced automatically.
(855) 295-4003Fort Worth repair calls cover everything from a 1930s mortise lock in the Cultural District to a five-year-old builder deadbolt that never aligned right. Different problems, different fixes. Our techs carry parts and pinning kits for both ends of that range.
Fort Worth spans downtown high-rises, historic Cultural District homes and west-side new build — no two calls look alike. We cover all of it under Texas DPS license #B28617101, across Tarrant County, from 10AM to midnight — seven days a week, holidays included.
When a key only works if you jiggle it, either the key or the cylinder has worn. We identify which and fix that one.
Set screws, spindles, and internal mechanisms rebuilt rather than replaced when the hardware is otherwise sound.
Strike plate adjustment, mortising, and hinge work where the door has dropped. This is the single most common repair we do.
Fragment removed from the cylinder, then an assessment of whether the lock and the remaining key are still serviceable.
Sagging doors, loose hinges, and closers that slam or don't latch. The hardware can't work if the door doesn't sit right.
We test the lock with the door open and closed. If it works open and fails closed, the problem is the door or the strike, not the lock — and that changes the whole repair.
You get a plain explanation of what's wrong and what repair versus replacement costs, before we start.
Cylinder service, re-pinning, strike adjustment, latch work and hinge correction are all done during the visit with parts from the truck.
Cycled repeatedly with the door closed, locked and unlocked, from both sides. That's the only test that means anything.
We extract the fragment and assess the cylinder. Often the lock is fine once the piece is out.
You have to push or lift the door to lock it. Alignment problem, quick fix, and ignoring it eventually kills the bolt.
Fast repair plus rekey between tenants, done in one appointment.
Set screws, spindles and internal wear. Rebuildable in most cases.
Original Fort Worth hardware that's worth keeping. Rebuilt rather than discarded.
A deadbolt that throws fine with the door open but binds when it's closed is almost always a strike alignment issue caused by the door settling or the frame shifting. Replacing the lock does nothing. Adjusting the strike takes minutes.
A key that has to be wiggled, lifted, or held at an angle usually means the key is worn, not the lock. Keys copied from copies drift further from the original cut each generation. Cutting a fresh key from the original code, where one exists, solves a surprising number of these calls.
Dispatched from Grand Prairie, typically reaching Fort Worth in 20–40 minutes depending on traffic.
Fort Worth home lock repair calls are dispatched to the closest available mobile unit, normally arriving in 20–40 minutes. We work the whole city — ZIP 76102, 76104, 76107, 76109, 76110, 76116, 76132 — and carry pinning kits, springs, strike plates, latch parts and closer components so first-visit completion is the norm.
TCU and TCU-area student turnover means heavy rekey demand every August and May — we run extended capacity those months for landlords and property managers.
Tell us what you need. We'll text or call back fast — usually within 15 minutes during open hours.
Based in Grand Prairie, with mobile units staged across the region. Tap the map to open directions in Google Maps.
