Exit devices, door closers, mortise locks and misaligned commercial doors repaired in Burleson — before they become a compliance problem.
(855) 295-4003A Burleson storefront door that doesn't latch properly is a nightly security problem and a daily annoyance for staff. Most of the time the cause isn't the lock — it's a closer that's out of adjustment or a strike that's drifted after thousands of cycles. We fix the actual cause so it stops recurring, and we do it without pulling the door out of service during business hours.
Burleson's subdivision growth south of Fort Worth means a constant flow of closings and move-ins. We cover all of it under Texas DPS license #B28617101, across Johnson County, from 10AM to midnight — seven days a week, holidays included.
Strikes that buzz but don't release, and hardware that doesn't relock properly after a card read.
Push bars that stick, latch, or fail to retract. Egress hardware is a safety item and gets priority over convenience items.
Worn cylinders on high-cycle doors serviced, or re-pinned where a key has been circulating too long.
The most common commercial door fault in Burleson. The door has moved; the strike hasn't.
Commercial mortise bodies stripped, cleaned, re-sprung and re-pinned rather than automatically replaced.
Tell us what the door does — won't latch, sticks, slams, doesn't relock. That narrows the cause faster than a brand name would.
The tech evaluates lock, latch, strike, closer, hinges and frame as one system, because commercial doors fail as one system.
Common closers, strikes, springs and cylinder parts are on the truck, so most Burleson repairs finish in one visit.
Every repaired opening cycled and, on exit doors, egress verified. We note anything else heading toward failure.
The one that gets propped open during deliveries and never quite recovers.
Adjustment, seal failure, or a closer past its life. All three are fixable.
Extracted and assessed, usually with the door back in service the same visit.
Aluminum storefront frames shift with heat and use. Common in Burleson and correctable.
Staff have to pull it shut. That means it's unlocked whenever nobody remembers, which is most of the time.
Not every faulty door is equally urgent. An exit device that doesn't retract cleanly is a life-safety issue and goes to the front of the queue. A door that doesn't latch and relock behind staff is a security issue and goes next. A closer that slams is annoying and goes last, unless it's beating a door and frame apart, which it eventually will.
The reason we push repair over replacement on Burleson commercial work is that a lot of commercial hardware is genuinely repairable and genuinely expensive to replace. Mortise bodies, quality exit devices and heavy closers are built to be serviced. Replacing them because a spring failed is an expensive habit.
Dispatched from Grand Prairie, typically reaching Burleson in 20–40 minutes depending on traffic.
For commercial lock repair in Burleson, we run from Grand Prairie into Johnson County on a 20–40 minute typical drive. Neighborhoods like Mountain Valley Lake and Hidden Creek are regular stops for us, and the trucks carry closer parts, exit device components, commercial strikes and cylinder service kits.
Burleson new-builds in Mountain Valley and Hidden Creek subdivisions get consistent builder-rekey requests at closing — we offer flat-rate full-home packages.
Tell us what you need. We'll text or call back fast — usually within 15 minutes during open hours.
Based in Grand Prairie, with mobile units staged across the region. Tap the map to open directions in Google Maps.
